BN Products BNG4000iE, Руководство пользователя

Страница: 33 / 37

33
10. Storing
To avoid combustion or misfire due to contact with
high-temperature components of the generator, the generator
must be cooled before packaging and storage.
If long-term storage is required, please make sure the storage area
is clean and dry.
1
）
Drain fuel from the fuel tank.Clean the fuel filter, O - ring seal
and precipitation cup after the assembly.Unscrew the carburetor
drain bolt, drain the fuel from the carburetor entirely, then reinstall
and tighten the carburetor drain bolt.
In ordinary circumstances, gasoline is flammable and explosive.
Please discharge oil in well-ventilated condition after stop. No
fireworks during oil discharge.
2
）
Unscrew the oil gauge and Oil drain bolt on the crankcase, and
drain the oil in the crankcase. Then tighten the drain bolts, add
new oil to the upper limit, and then install the oil gauge.
3) Remove the spark plug and pour a tablespoon of clean engine
oil into the combustion chamber. Turn the crankshaft several
times to distribute the oil. Reinstall the spark plugs.
4) Gently pull the starting handle until resistance is felt, leaving
the inlet and exhaust doors close.
5)Place the generator set in a clean and dry area.