BN Products BNCE-20 SN, Руководство по эксплуатации и инструкция, Страница: 4 / 8

~ Page | 4 ~
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
• Power tools are dangerous in the hands of un-
trained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s opera-
tion. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
Service
• Have your power tool serviced only by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Contents of the Cutting Edge Saw Package
Upon purchasing the Cutting Edge Saw, open the carrying
case and check the contents for the following:
120 Volt Corded Cutting Edge Saw Package
1. BNCE-20 Corded Cutting Edge Saw with blade
mounted : 1 unit
2. Removable Side Handle and chip collector
attachment: 1 unit
3. Allen Wrenches for Blade Removal and
Installation: 1 unit
4. Additional Saw Blade: 1 unit
5. Operation Manual: 1 copy
6. Extra set of electrical brushes
If anything is missing or damaged please do not return this
packaged unit to the distributor, please call the Benner-
Nawman customer service department: 800-992-3833 or
928-684-2813
Functions and Applications
This section describes the functions, applications, service
environment and other aspects of the Cutting Edge Saw.
The Cutting Edge Saw is a power tool developed for fast
and efficient cutting of various ferrous and non-ferrous
materials. This multipurpose tool can be used by a variety
of contractors however the primary design was for flush
cutting or free cutting reinforcing bars, coil rod and all-
threaded rod used in the construction industry.
Application of the Tool - Actual areas of application the
Cutting Edge Saw is used for are as follows:
3/8” to 3/4“or 10 mm to 19 mm grade 60 rebar (reinforc-
ing bars), up to ½” I.D pipe, ¾” O.D. copper water pipe,
¾” O.D. tubing, 1/2” conduit, ¾” square steel tubing &
bar, and up to 7/8” O.D. all-threaded or coil rod.
Rules of Use and Storage - To use the tool to its fullest per-
formance, the user is required to be fully familiar with the
saw itself, the cutting blades, and storage procedures upon
completion of work.
Specification
The power tool is a multipurpose saw with an enclosed
guard and flush cutting capabilities. The specifications of
the main unit are as follows.
Standard Blade: (Best for Ferrous Metals)
Supplied with (2) each 110 mm Blade diameter × 1.6mm
thickness, 24 teeth with laser welded flange for mounting
to Cutting Edge saw spindle. The maximum blade RPM is
2000.
Operation
Checking and Preparation of Working Environment:
Check the following before using the Cutting Edge Saw. Al-
ways observe the instructions and prohibited items.
Checking of weather conditions, do not use in the rain or
snow:
!DANGER: The Cutting Edge is not a wa-
terproof power tool. If it becomes wet,
the power source system may become
faulty or the operator may get an electric
shock. Therefore, when it is raining or
snowing, never operate this saw out-
doors, on top of buildings or under roofs
where rain or snow enters freely. Do not use where water
accumulates or where water splashes.