BMW X5 xDrive45e PLUG-IN HYBRID 2022, Руководство пользователя

Страница: 396 / 444

Safety information
Warning
With the engine hot and the cooling system
open, coolant can escape and lead to scald-
ing. There is a risk of injury. Only open the
cooling system with the engine cooled down.
Warning
Additives are harmful and incorrect additives
can damage the engine. There is a risk of
injury and risk of damage to property. Do not
allow additives to come into contact with skin,
eyes or articles of clothing. Use suitable addi-
tives only.
Coolant level
General information
Depending on the motorization, there are up to
two coolant reservoirs in the engine compart-
ment. Check and add the coolant levels on a
regular basis.
The coolant may be overfilled in the coolant
reservoir when the vehicle is delivered from the
factory. The normal coolant level is achieved
by operating the vehicle for a longer period.
The coolant level is indicated using minimum
and maximum marks in the filler neck of the
coolant reservoir.
Additional information:
For an overview, refer to page
388 .
Checking the coolant level
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page
389 .
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres-
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. The coolant level is correct if it lies between
the minimum and maximum marks in the
filler neck.
6. Close the lid.
Adding coolant
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page
389 .
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres-
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant up
to the specified fill level; do not overfill.
6. Close the lid.
7. Have the cause of the coolant loss elimi-
nated as soon as possible.
Disposal
Comply with the relevant environmen-
tal protection regulations when dispos-
ing of coolant and coolant additives.
Washer fluid
General information
All windshield washer jets are supplied from
one tank.
Seite 396
MOBILITY Operating materials
396
Online Edition for Part no. 01405A604A9 - VI/22