BMW X5 xDrive45e PLUG-IN HYBRID 2022, Руководство пользователя

Страница: 195 / 444

Functional requirements
▷ Setting at standstill only.
▷ Drive-ready state is switched on.
▷ Light is turned off.
Increasing sensitivity
Push the turn signal lever to the front for ap-
proximately 10 seconds.
A Check Control message is displayed. The
system responds more sensitively.
Resetting the sensitivity
Push the turn signal lever to the front again
for approx. 10 seconds or switch off the drive-
ready state.
The sensitivity of the Automatic High Beam
Assistant is reset to the factory settings.
System limits
The Automatic High Beam Assistant cannot
replace the driver's personal judgment of when
to use the high beams. In situations that re-
quire this, therefore dim manually.
The system is not fully functional in the follow-
ing situations, and driver intervention may be
necessary:
▷ In very unfavorable weather conditions,
such as fog or heavy precipitation.
▷ When detecting poorly-lit road users such
as pedestrians, cyclists, horseback riders
and wagons; when driving close to train or
ship traffic; or at animal crossings.
▷ In tight curves, on hilltops or in depressions,
in crossing traffic or half-obscured oncom-
ing traffic on highways.
▷ In poorly-lit towns and cities or in the pres-
ence of highly reflective signs.
▷ When the windshield in front of the interior
mirror is fogged up, dirty or covered with
stickers, etc.
Laser high beams
Principle
The headlight range of the high beams is in-
creased and provides better illumination of the
road.
General information
The laser high beams are integrated into the
headlights and emit from there.
When the high beams are switched-on, start-
ing with a speed of approx. 37 mph/60 km/h,
the laser high beams in the headlight are auto-
matically switched on in addition to the LED
high beams.
Depending on the national-market version, ad-
ditional information can be taken from the la-
ser sign on the headlight.
Safety information
The sign is in the headlight and is visible from
the outside.
Instrument lighting
Functional requirement
The parking lights or low beams must be
switched on to set the brightness.
Seite 195
Lights CONTROLS
195
Online Edition for Part no. 01405A604A9 - VI/22