BMW X5 PLUG-IN HYBRID, Руководство пользователя

Страница: 111 / 432

Opening/closing the glass
sunroof and sun protection
separately
▷ Press the switch in the desired
direction to the resistance
point and hold it there.
Holding down the switch
opens the sun protection. If
the sun protection is already
fully open, the glass sunroof
opens.
The glass sunroof closes
while the switch is being held.
If the glass sunroof is already
closed or in the tilted position,
the sun protection closes.
▷ Push the switch in the desired direction past
the resistance point.
The sun protection opens automatically. If the
sun protection is already fully open, the glass
sunroof opens automatically.
The glass sunroof closes automatically. If the
glass sunroof is already closed or in the tilted
position, the sun protection closes automati‐
cally.
Pressing the switch upward stops the motion.
Opening/closing the glass
sunroof and sun protection
together
Briefly press the switch twice in
succession in the desired direc‐
tion past the resistance point.
The glass sunroof and sun pro‐
tection move together. Pressing
the switch upward stops the motion.
Comfort position
In some models, the wind noises in the car's in‐
terior are lowest when the glass sunroof is not
fully open. In these models, the automatic func‐
tion initially only opens the glass sunroof up to
this comfort position.
Pressing the switch again opens the glass sun‐
roof fully.
Jam protection system
Concept
The jam protection prevents objects or body
parts from becoming jammed between the roof
and glass sunroof while the glass sunroof is clos‐
ing.
General information
If a resistance or blockage is detected while the
glass sunroof is closing, the closing operation is
interrupted once the roof reaches the half-open
position, or it is stopped when closing from the
tilted position.
Closing from the open position
without jam protection
In case of danger from the outside or if ice might
prevent normal closing, proceed as follows:
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a spe‐
cific threshold, closing is interrupted.
3. Push the switch forward again past the resist‐
ance point and hold until the glass sunroof
closes without jam protection. Make sure that
the closing area is clear.
Seite 111
Opening and closing
CONTROLS
111
Online Edition for Part no. 01405A03663 - II/20