BMW X5 - CATALOGUE, Руководство пользователя

Страница: 282 / 440

BMW display key, refer to page 87 .
4. On the BMW display key, change to the fol‐
lowing menu: "Entry level".
5. "Height control"
6. ▷ "Lower": tap the button. The vehicle low‐
ers itself to the entry level.
For safety reasons, lowering is only possi‐
ble from the normal level or the Sport
level.
▷ "Raise": tap the button. The vehicle will
raise itself from the entry level according
to the selected driving mode.
Terminating the adjustment procedure
An adjustment procedure that was started on the
BMW display key can be terminated with the
BMW display key.
"Cancel": tap the button. The vehicle raises or
lowers itself back to the starting level.
With the button in the lower tailgate
When the tailgate is opened, the vehicle
can be lowered to the entry level and
raised again by pressing the button. The flashing
of the LED in the button indicates the level
change.
During the raising procedure, the vehicle raises
itself from the entry level to the level that was se‐
lected last or the normal level.
Terminating the adjustment procedure
An adjustment procedure that was started with
the button in the lower tailgate can be terminated
with this button.
Press the button again. The vehicle raises or
lowers itself back to the starting level.
System limits
▷ It is not possible to change the level during
sporty driving.
▷ It may not be possible to change the level if
the axles are limited.
▷ It may only be possible to lift the vehicle level
while the engine is running.
▷ If the state of charge of the vehicle battery is
too low, a level change may not be possible.
▷ If level adjustment is activated frequently in
quick succession, the system switches off to
prevent overheating and is temporarily un‐
available or operates with a delay. Let the
system cool down, if needed.
The rapidly flashing LED on the rocker switch
indicates that the system is unavailable.
▷ If the load is increased, the highest driving
level may be disabled or automatically exited
in order to protect the system.
▷ When the trailer power socket is in use or
when trailer towing is activated, only the nor‐
mal level is available.
Wheel change
Before a wheel change, deactivate the system:
Press the rocker switch forward or pull it back‐
ward for approx. 7 seconds. After the rocker
switch is released, the LED indicator on the
rocker switch will go out.
Activating the system: press the rocker switch
forward or pull it backward for approx. 7 seconds.
After the rocker switch is released, the LED indi‐
cator will reactivate.
Malfunction
A Check Control message is displayed. The sys‐
tem is impaired. Vehicle handling may be altered
and driving comfort may be noticeably reduced.
Visit the nearest dealer's service center or an‐
other qualified service center or repair shop.
Long periods when vehicle is
parked
During long periods when the vehicle is parked, it
can lower itself. This is not a malfunction.
When the drive-ready state is switched on with
the doors closed, the vehicle is raised to the nor‐
mal level automatically.
Seite 282
CONTROLS
Driving comfort
282
Online Edition for Part no. 01405A37D22 - VI/21