BMW S 1000 RR - 2010 Скачать руководство пользователя страница 118

Страница: 118 / 178

Measure clutch play

between

handlebar fitting and clutch
lever in this position.

Clutch lever play

0.02...0.04 in (0.5...1.0 mm)
(on the handlebar fitting,
when the engine is cold)

If clutch play is outside tolerance:

Adjusting clutch lever play
(

116).

Adjusting clutch lever
play

To increase clutch play: screw
screw

into handlebar fitting.

To decrease clutch play: screw
screw

out of handlebar fit-

ting.
Checking clutch lever play
(

115).

Repeat work steps until clutch
play is correctly adjusted.

Tires

Checking tire tread depth

The handling of your mo-
torcycle can already change

for the worse before the legally
prescribed minimum tread depth
is reached.
Have tires replaced even be-
fore the minimum tread depth
is reached.

Make sure ground is level and
firm and park motorcycle.
Measure tire tread depth in
main tread grooves with wear
indicating marks.

Tires have wear indicators
integrated into the main

tread grooves. If the tire tread
has worn down to the level of
the marks, the tire is completely
worn. The locations of the marks
are indicated on the edge of the
tire, e.g. by the letters TI, TWI or
by an arrow.

116

Maintenance

Содержание S 1000 RR - 2010



















































































































































































Результаты поиска

Содержание S 1000 RR - 2010

Отзывы:

BMW S 1000 RR - 2010, Руководство пользователя для мотоциклиста, Страница: 118 / 178

Результаты поиска

Содержание S 1000 RR - 2010

Отзывы: