Installing the DVD Map Disc
Your dealer/retailer installs the map
database information on the HDD.
An updated map disc can be
used to update the map database
information, see Ordering Map DVDs
on page 76 later in this section.
Before updating the map database
on the HDD, read the following
steps:
1. Turn ignition on.
2. Press VOL/
O
to turn the
system on.
3. Insert the map update disc into
the slot, label side up.
4. Press the Update screen button
when the Update Confirmation
screen displays.
5. Enter the Authentication Code,
then press Enter.
6. If the correct code is entered, the
system starts updating and the
status bar displays.
7. Press
Z
after the map
database update is completed.
If the application update file
is included in the disc, the
application update is also done.
Handling the DVD Map Disc
•
Handle the disc very carefully to
avoid contamination or flaws.
Signals might not read out
properly.
•
Use a soft cloth if the disc gets
soiled and gently wipe it out
from the center of the disc to the
outside. Do not use cleaners
or solvents.
•
Do not use the disc to rest on
while writing or drawing using
any writing utensil or attach
a seal to any of the sides or
the disc.
•
Do not keep the disc in direct
sunlight, high temperatures, or
humidity.
•
Place the disc back into the
original case after use.
Map Adjustments
The scale of view on the map can
be adjusted.
Infotainment System
47
Содержание M5
Страница 2: ......
Страница 98: ... NOTES 98 Infotainment System ...
