BMW M COUPE, Руководство пользователя

Страница: 57 / 167

57 n
Index
Data
Te
chnolog
y
Repairs
Maintenance
Controls
Overview
Switching off the engine Parking brake
Turn the ignition key to position 1 or 0.
Never remove the ignition key
while the vehicle is rolling. The
steering locks and it is impossible to
steer the vehicle.
Always remove the ignition key and
engage the steering lock before leaving
the vehicle.
Always engage the parking brake when
parking on slopes and inclined
surfaces, since even placing the gear-
shift lever in 1st gear or reverse may not
provide adequate resistance to
rolling.
<
The parking brake is designed primarily
to prevent the vehicle from rolling when
parked. It operates against the rear
wheels.
To engage
The lever engages automatically when
you pull it up, and the indicator lamp in
the instrument cluster comes on when
the ignition key is in position 2, refer to
page
21 .
To release
Pull up slightly on the lever, press the
button and lower the lever.
367de028
If, in exceptional circumstances,
it should be necessary to engage
the parking brake while the vehicle is
in motion, do not pull it with excessive
pressure. Keep your thumb pressed
against the release button while care-
fully pulling up the lever to apply
moderate pressure.
Excessive pressure can lead to over-
braking and loss of traction at the rear
(fishtailing).
The brake lamps do not come on when
the parking brake is engaged.
Always engage the parking brake when
parking on slopes and inclined
surfaces, since even placing the gear-
shift lever in 1st gear or reverse may not
provide adequate resistance to
rolling.
<
To avoid corrosion and one-sided
braking, apply the parking brake lightly
from time to time when coasting to a
standstill (at a traffic signal, for
instance), provided that it is safe to do
so.