BMW K 1300 S Rider's, Руководство пользователя для мотоциклиста

Страница: 56 / 147

the desired setting appears in
the display.
The load setting cannot be
adjusted while the motorcy-
cle is underway.
If the 1 button is not pressed
for a longer time, damping
and loading will be adjusted
as shown. Then the ESA dis-
play is automatically hidden.
Tires
Checking tire pressure
Incorrect tire inflation pres-
sure results in poorer han-
dling characteristics of the motor-
cycle and reduces the life of the
tires.
Ensure proper tire inflation
pressure.
At high road speeds, tire
valves installed perpen-
dicular to the wheel rim have a
tendency to open as a result of
centrifugal force.
In order to avoid a sudden loss of
tire inflation pressure, fit a valve
cap with rubber sealing ring to
the rear tire and make sure that
the cap is screwed on firmly.
Make sure ground is level and
firm and park motorcycle.
Check tire pressures against
data below.
Tire pressure, front
36.3 psi (2.5 bar) (With tire
cold)
Tire pressure, rear
42.1 psi (2.9 bar) (With tire
cold)
If tire pressure is too low:
Correct tire pressure.
Headlight
Adjusting headlight for
RHD/LHD traffic
If the motorcycle is ridden in a
country where vehicles are driven
in the opposite lane relative to
your own country, its asymmetric
low-beam headlight will tend to
blind oncoming traffic.
Have the headlight adjusted for
these conditions by an authorized
service facility, preferably an au-
thorized BMW Motorrad retailer.
Ordinary adhesive tape
damages the plastic lens.
To prevent damage to the plastic
lens, consult a specialized work-
shop, preferably an authorized
BMW Motorrad retailer.
4
54
z Operation