BMW K 1200 LT, Руководство по ремонту, Страница: 9 / 16

00.45
Brake pads/brake discs
Checking brake pads and discs for wear and
replacing if necessary
(Inspections II and III)
Checking brake pads for wear
d
Warning:
Never permit brake pads to wear past minimum per-
missible thickness.
Always replace pads as a complete set.
Front brake pads
e
Caution:
Do not scrape the wheel – mask it off if necessary.
– Remove the brake calliper.
•
Measure brake pad thickness (arrows).
Minimum pad thickness .............. 1.0 mm (0.04 in)
X
Tightening torques:
Brake calliper to fork tube ............................ 40 Nm
Rear brake pads
•
Release the brake line from the clips (arrows) on
the rear-wheel drive.
•
Release fasteners (1, 2), remove brake calliper.
•
Measure brake pad thickness (arrows).
Minimum pad thickness .............. 1.0 mm (0.04 in)
X
Tightening torques:
Brake calliper to rear wheel drive ................. 40 Nm
KR340240
KL000060
1
2
KL000160