BMW K 1200 GT -, Руководство пользователя для мотоциклиста

Страница: 73 / 160

ABS self-diagnosis can-
not be performed if the
ignition is switched on while
the brake lever is pulled or
the brake pedal depressed.
Self-diagnosis is performed
as soon as the brake levers
are in their fully released po-
sitions for the first time. Until
this completes the ABS func-
tion is not available and the
same applies to power assist-
ance for the brakes; the sys-
tem is in the residual braking
function mode.
When you start the engine,
wait for the ABS to complete
its self-diagnosis.
Press starter button
1
.
If ambient temperatures
are very low, you might
find it necessary to open the
throttle slightly when starting
the engine. At ambient tem-
peratures below 0 °C, disen-
gage the clutch after switch-
ing on the ignition.
The start attempt is
automatically interrupted
if battery voltage is too low.
Recharge the battery before
you start the engine, or use
jump leads and a donor
battery to start.
The engine starts.
Consult the troubleshooting
chart below if the engine
refuses to start. ( 130)
Pre-ride check
The instrument cluster runs
a test of the 'General' warn-
ing light when the ignition
is switched on. The warn-
ing light shows first red and
then yellow, so that you can
check that it is in working or-
der. This pre-ride check is in-
dicated by the word
CHECK!
appearing in the display. If
the motorcycle is equipped
with the cruise control op-
tional extra,
SET
lights up
as well. The test is aborted
if you start the engine before
it completes.
Phase 1
General warning light
shows red.
The
CHECK!
reminder ap-
pears on the display.
5
71
z Riding
ProCarManuals.com