BMW i8 COUPE, Руководство пользователя

Страница: 148 / 264

▷ The menu for the intelligent safety system is
displayed. The systems are individually
switched off according to their respective
settings.
▷ LED lights up orange or goes out respective
to their individual settings.
Adjust as needed. The individual settings are
stored for the driver profile currently in use.
Press button again:
▷ All Intelligent Safety systems are
switched on.
▷ The LED lights up green.
Hold down button:
▷ All Intelligent Safety systems are
switched off.
▷ The LED goes out.
Setting the warning time
The warning time can be set.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Warning time"
5. Select the desired setting.
The selected time is stored for the driver profile
currently used.
Warning with braking function
Display
A warning symbol appears in the instrument
cluster and in the Head-up Display if a collision
with a detected vehicle is imminent.
Symbol Measure
Symbol lights up red: prewarning.
Brake and increase distance.
Symbol flashes red and an acoustic
signal sounds: acute warning.
Brake and make an evasive maneuver,
if necessary.
Prewarning
This warning is issued, for instance when there is
the impending danger of a collision or the dis‐
tance to the vehicle ahead is too small.
The driver must intervene actively when there is
a prewarning.
Acute warning with braking function
Acute warning is displayed in case of the immi‐
nent danger of a collision when the vehicle ap‐
proaches another object at a high differential
speed.
The driver must intervene actively when there is
an acute warning. If necessary, the driver is as‐
sisted by a minor automatic braking intervention
in a possible risk of collision.
Acute warnings can also be triggered without
previous forewarning.
Braking intervention
The warning prompts the driver to react. During
a warning, the maximum braking force is used.
Prerequisite for the brake booster is sufficiently
quick and hard stepping on the brake pedal. If
there is a risk of collision, the system may assist
with braking. When the vehicle is traveling at a
low speed, the vehicle may come to a complete
stop.
The braking intervention occurs only if vehicle
stability has not been restricted, for instance by
deactivating the DSC Dynamic Stability Control.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by actively
moving the steering wheel.
Seite 148
CONTROLS
Safety
148
Online Edition for Part no. 01402989296 - II/18