BMW HP2 SPORT, Руководство пользователя для мотоциклиста, Страница: 137 / 184

Height of auxiliary stand can be
adjusted with scissors jack
7
for a safe stance.
Lamps
General instructions
A warning appears in the multi-
function display if a bulb is defec-
tive. If the brake or rear light fails,
the symbol is accompanied by
the 'General' warning light, which
lights up yellow.
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurized and
can cause injury if dam-
aged.
Wear eye and hand protection
when replacing bulbs.
An overview of the bulb
types installed in your mo-
torcycle is provided in the chap-
ter "Technical Data".
Do not touch the glass of
new bulbs with your fin-
gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.
Replacing low-beam/high-
beam bulb
The alignment of the con-
nector and the spring strap
may differ from the illustration.
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Turn handlebars.
10
135
z Maint
e
nance