BMW G 650 Xmoto Скачать руководство пользователя | Manualshive

Страница: 96 / 133

background image

attempt in order to protect the
starter motor and the donor
battery.
Allow both engines to idle for a
few minutes before disconnect-
ing the jump leads.
Disconnect the jump lead from
the negative terminal and the
ground point first, then dis-
connect the second jump lead
from positive terminal

3

.

Do not use proprietary
start-assist sprays or oth-

er products to start the engine.

Install the right side panel
(

94)

Battery

Maintenance instructions

Correct upkeep, recharging and
storage will prolong the life of
the battery and are essential if
warranty claims are to be con-
sidered.

Compliance with the points be-
low is important in order to max-
imise battery life:

Keep the surface of the battery
clean and dry
Do not open the battery
Do not top up with water
Be sure to read and comply
with the instructions for char-
ging the battery on the follow-
ing pages
Do not turn the battery upside
down

If the battery is not discon-
nected, the on-board elec-

tronics (e.g. clock, etc.) gradually
drain the battery. This can cause
the battery to run flat. If this hap-
pens, warranty claims will not be
accepted.
If the motorcycle is to be out of
use for more than four weeks,
disconnect the battery or con-
nect a suitable trickle charger to
the battery.

Charging battery when
connected

Charging the connected
battery directly at the bat-

tery terminals can damage the
vehicle electronics.
Always disconnect the battery
from the on-board circuits be-
fore recharging it with a charger
connected directly to the battery
posts.

If you switch on the igni-
tion and the multifunction

display and telltale lights fail to
light up, the battery is completely
flat. Attempting to charge a com-
pletely flat battery via the on-
board socket can cause damage
to the motorcycle's electronics.
If a battery has discharged to the
extent that it is completely flat, it
has to be disconnected from the
on-board circuits and charged
with the charger connected dir-
ectly to the battery posts.

8

91

z

Maintenance

«
...
94
95
96
97
98
...
»

Содержание G 650 Xmoto






































































































































Отзывы:

Нет отзывов

Похожие инструкции для G 650 Xmoto

Бренд: ICON Страницы: 8

Бренд: UNIT 1 Страницы: 23

Бренд: Kabuto Страницы: 16

690 Enduro R 2013

Бренд: KTM Страницы: 234

2005-2006 Hammer

Бренд: Victory Motorcycles Страницы: 12

690 Enduro R AU/GB 2014

Бренд: KTM Страницы: 18

Mambo Evo PURE CARBON

Бренд: LAZER Страницы: 13

Бренд: N-Com Страницы: 2

GRIZZLY 90 2020

Бренд: Yamaha Страницы: 132

Бренд: Yamaha Страницы: 132

Бренд: Yamaha Страницы: 166

Бренд: Yamaha Страницы: 452

Бренд: Yamaha Страницы: 132

TMAX ABS Series

Бренд: Yamaha Страницы: 122

Tenere 700 2024

Бренд: Yamaha Страницы: 110

Бренд: LSL Страницы: 4

BRUTALE 750 ORO

Бренд: MV Agusta Страницы: 386

Бренд: DYNATEK Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды