BMW F12 2011, Техническое учебное пособие, Страница: 14 / 68

F12�Chassis�Dynamics
3.�Chassis�and�suspension
10
Index Explanation
8 Camber�link
9 Rubber�mount�for�rear�axle
10 Rear�axle�support
11 HSR�actuator
3.2.1.�Technical�data
650i
Rear�tire 245/40�R19
Rear�wheel�rim 19�x�8.5
Total�toe-in 14'�±�12'
Camber -1°50'�±�25'
Track�width 1629�mm
Rim�offset�IS 44�mm
3.2.2.�Service�Information
The�following�tables�show�when�wheel�alignment�at�the�integral�V�rear�axle�is�necessary.
Component�replaced Wheel�alignment�required
Rear�axle�support YES
Rubber�mount�for�rear�axle NO
Swinging�arm YES
Integral�link YES
Ball�joint�in�swinging�arm YES
Camber�link YES
Wishbone YES
Wheel�carrier YES
Wheel�bearing NO
Spring�strut NO
Support�bearing NO
Screw�connection�unfastened Wheel�alignment�required
Rear�axle�support�to�body NO
Front�compression�strut�to�body NO
Rear�compression�strut�to�body NO
Front�swinging�arm�to�rear�axle�support YES