BMW F 700 GS 2012 Скачать руководство пользователя страница 44

Страница: 44 / 162

Immediately after switching off
the ignition, push button

the left and hold it in this po-
sition until the parking lights
come on.
Switch the ignition on and off
again to switch off the parking
lights.

Turn indicators

Operate the flashing turn
indicators

Switch on the ignition.

The turn indicators are can-
celled automatically after

you have ridden for approximately
10 seconds and covered a dis-
tance of about 300 m.

Push button

to the left to

switch on the left flashing turn
indicators.
Push button

to the right to

switch on the right flashing turn
indicators.
Centre button

to cancel the

flashing turn indicators.

Hazard warning
flashers

Operating hazard warning
flashers

Switch on the ignition.

The hazard warning flash-
ers place a strain on the

battery. Do not use the hazard
warning flashers for longer than
absolutely necessary.

If you press a turn-indic-
ator button with the ignition

switched on, the turn-indicator
function is activated instead of
the hazard warning flashers, and
remains active until you release
the button. The hazard warning
flashers recommence flashing as
soon as the button is released.

Operation

ProCarManuals.com

Содержание F 700 GS 2012



































































































































































Результаты поиска

Содержание F 700 GS 2012

Отзывы:

BMW F 700 GS 2012, Руководство пользователя для мотоциклиста, Страница: 44 / 162

Результаты поиска

Содержание F 700 GS 2012

Отзывы: