BMW C 600 Sport, Руководство пользователя для мотоциклиста

Страница: 94 / 154

Viewing direction: from the
right toward brake pads
1 .
Brake-pad wear limit of
parking brake
min 1.0 mm (The wear indic-
ators (grooves) must be clearly
visible.)
If the brake pads are worn past
the minimum permissible thick-
ness:
If the brake pads are per-
mitted to wear past the
minimum permissible thickness
braking performance is reduced
and there is the possibility of the
Maxi-Scooter moving even with
the side stand extended.
In order to avoid the risk of the
Maxi-Scooter toppling off its
stand, do not permit the brake
pads to wear past the specified
minimum thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Checking brake-fluid
level, front brakes
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.
Check the brake-fluid level at
regular intervals.
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
Check the brake fluid level in
sight glass
1 of the right brake-
fluid reservoir.
Wear of the brake pads
causes the brake fluid level
in the reservoir to sink.
9
92
z Maintenance