EN/3
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056
Issue date: 02.2003
Important information
Subject to technical modifications.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP.
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
Additional cables/lines that you install must be secured with cable ties.
All the figures show LHD cars, proceed in exactly the same way on RHD cars.
Target group
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies. In any event the target group for these installation instructions is
specialist personnel trained on BMW cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and
work instructions in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Ordering instructions
The snap-in adapter is not supplied with the retrofit kit and must be ordered separately for the various
telephones.
The voice input control module
R
is not supplied with the retrofit kit and must be ordered separately for the
appropriate language.
Pictograms
Denotes instructions that draw your attention to special features.
Denotes instructions of warnings that you must observe.
Denotes the end of the instruction or caution text.
List of special equipment
The following special equipment must be taken into consideration when installing the Universal “Komfort”
hands-free kit.
SA 403
Glass roof
Special tools required
None
!