Retrofit / Installation kit No. 84 64 0 025 819, 84 64 0 025 882, 84 64 0 025 883, 84 64 0 026 656, 84 64 0 026 657, 84 64 0 026 658
Issue date: 07.2000 Installation instructions No. 01 29 0 025 889
The F designations marked with an asterisk
(*) are only valid for this installation and do not
refer to the after-sales service documents.
Insert fuses F1* to F4* (13) into the fuse holder
B9
as shown in the following table:
Fuse
Slot
Cable colour
3 A
F1*
red/white and
red/black
3 A
F2*
red/white and
red/yellow
1 A
F3*
rviolet/white and
violet/black
3 A
F4*
violet/white and
violet/yellow
Insert the fuse holder
B9
into the free slot in the
joint connector box on the A pillar on the left.
10. To install and connect the wiring harnesses and switch module
B9
13
F 36 0126 M
D1
9
2
A3
E1
9
F 36 0136 M
The figure shows the footwell trim on the
E36/5, proceed accordingly for the other
models.
Connect branches
A3
,
D1
and
E1
to the control
module (2) and secure it with cable ties (9).
Tie back surplus lengths of the cables and install
the footwell trim.
EN/35
