background image

 

EN/3

 

Retrofit / Installation kit No. 84 61 0 028 926
Installation Instructions No. 01 29 0 029 567

Issue date: 11.2001

 

Important information

 

This upgrade kit is for use within the BMW dealership organisation only.

 

Target group

 

The target group for these installation instructions is specialist personnel trained on BMW cars 
with specialist knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on BMW cars is completed at your own risk.
All work is to be carried out using current BMW
- Repair manuals
- Circuit diagrams
in a rational order using the prescribed tools (special tools) and observing current health and 
safety regulations.

 

Ordering instructions

 

Centre console insert
A black insert for the centre console is supplied in the upgrade kit.
An insert for the centre console in other colours for cars with different interior colours can be 
ordered if required. See the EPC for all further ordering information.

 

Safety instructions

 

The current accident prevention regulations must be followed.
Refer to the safety instructions for handling components of the airbag system. Further 
information is available in the TIS in RA No. 32 34 ... If you fail to follow the safety instructions 
the airbag system may deploy incorrectly and cause injuries.

 

List of pictograms and special equipment

 

Denotes information that must be read before the installation work for safety reasons and 
to avoid damaging the car.

Denotes instructions that draw your attention to special features.

 

SA 401

 

Tilt and slide sunroof

!

Содержание 84 61 0 028 926














Отзывы: