Retrofit/Installation Kit no. 82 44 0 007 417 Date: 0
3
.2001
Installation Instructions no. 01 29 0 138 198
5.
Install supplementary wiring harness
F 53 0158 EVA
B
2
2
B
1
3
5
4
When working in the area of the roof side-
frame, care should be taken to see that the
airbag is not damaged and prevented from
functioning properly. Remove the airbag from the
airbag brackets and replace it after installation of
branch cable
B
.Take care to see that the airbag
is properly seated.
Do not damage the cable when drawing it
through the drill holes (1, 4, 5 and 2).
Guide a thin wire from the roof outer skin panel
through the drill holes (1, 4, 5 and 2) to the roof
side frame in the vehicle interior. With the aid of
the thin wire, thread branch cable
B
through the
drill holes (2, 5, 4 and 1) to the outside. Seal drill
hole (1) with Sikaflex 255 FC. Apply the seal (3) in
such a way that it makes a good fit in the
through hole of the seal moulding with through
hole (h). Fix branch cable
B
in the seal (3) in such
a way that branch cable
B
passes through the
drill holes (1, 4, 5 and 2) without chafing (see
magnification).
!
EN/12
