05/2012
01 29 2 320 769
© BMW AG, Munich
(T/Z/Z)
2
Installation information
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this
will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
After the installation work, the retrofit must be programmed/coded via the –
Conversions
– path.
Ordering instructions
The following parts are not supplied in the retrofit kit and must be ordered separately
(see EPC for part number and details):
- Headlight washer jets
H/I
for cars built before 4/12
- Footwell module
J
in cars built before 10/10
List of special equipment
The following special equipment must be taken into consideration when installing:
SA 524
Adaptive directional headlights
Special tools required
00 2 230, Rivet pliers
00 9 317, Wedge
00 9 322, Wedge
00 9 340, Removal tool
13 3 010, terminal (only required for exchanging the high-pressure jets of the headlight cleaning system)
