background image

01 29 2 320 769

05/2012

© BMW AG, Munich

(T/Z/Z)

1

Original BMW Accessories.

Installation Instructions.

05/2012

Retrofit LED headlights

BMW X5 M (E 70), X6 and X6 M (E 71)

Retrofit kit number

63 13 2 297 442

Retrofit kit LED technology headlights

Installation time

The installation time is 

approx. 3.75 hours

. This may vary depending on the condition of the car and the 

equipment in it. 

In addition, the installation time is increased:

- when exchanging the footwell module (cars built before 10/10 only) by 

approx. 0.5 hours

.

- when exchanging the high-pressure jets of the headlight cleaning system (cars built before 4/12 only) by a 

further 

approx. 0.75 hours

The installation times specified do not include the time spent on programming/coding.

The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs 
(no invoicing via warranty).

Important information

These installation instructions are primarily designed for use within the BMW dealership organisation and by 
authorised BMW service companies.

In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with 
the appropriate specialist knowledge.

All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work 
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety 
regulations.

If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for 
mechanical work and 1.0 hour for electrical work. 

To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts support team via 
the Aftersales Assistance Portal (ASAP).

Quote the following information:

- Chassis number,

- Retrofit kit part number,

- A detailed description of the problem,

- Any work already carried out.

Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP!

Pictograms

Denotes instructions that draw your attention to dangers.

Denotes instructions that draw your attention to special features.

Denotes the end of the instruction or warning text.

!

© BMW AG, Munich

01 29 2 320 769

(T/Z/Z)

Содержание 63 13 2 297 442














Отзывы: