BMW 2013 K 1600GTL Exclusive, Руководство пользователя для мотоциклиста

Страница: 72 / 174

Shifting
Adjusting shift lever
Slacken screw 1 .
Turn foot piece 2 into desired
position.
A foot piece adjusted too
high or too low can cause
problems when shifting. In case
of shifting problems, check the
adjustment of the foot piece.
Tighten screw 1 to appropriate
torque.
Eccentric, peg to shift
lever
6 lb/ft (8 Nm)
Windshield
Adjust windshield
Switch on ignition ( 41).
When you pull away the wind-
screen automatically returns to
the position it was in before the
ignition was switched off.
Press button 1 at top to raise
windshield.
Press button 1 at bottom to
lower windshield.
Switch off ignition (
42).
The windscreen automatically
moves to the bottom limit posi-
tion.
If the windscreen encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windscreen
is stopped and raised slightly.
After a delay of a few seconds
the windscreen again attempts
to move to the bottom limit
position.
4
70
z Operation