BMW 2008 5 Series, Руководство пользователя

Страница: 67 / 288

Co
n
tr
o
ls
65
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
When the selector lever is pressed forward or
back, the manual mode is activated and the
Steptronic shifts the gear. The instrument clus-
ter shows M1 through M6.
Upshifts and downshifts are only carried out at a
suitable engine and vehicle speed, e.g. a down-
shift is not carried out at excessively high
engine speeds. The selected gear is briefly dis-
played in the instrument cluster, followed by the
current gear.
To resume automatic mode, press the selector
lever to the right.
Manually unlocking and locking
transmission lock
In case of a power failure, e.g. when the battery
is drained or disconnected, or an electrical fault,
manually release the transmission lock, as oth-
erwise the rear wheels are blocked and the
vehicle cannot be towed.
Only manually release the transmission lock for
towing and firmly apply the handbrake before-
hand so that the vehicle cannot roll. Reengage
the transmission lock after parking the vehicle
at its destination.
Unlocking
1. Reach into the trim-piece opening, arrow 1 ,
and firmly pull the trim piece upward,
arrow
2 .
2. Remove cover over the opening, refer to 3.
3. Insert a screwdriver from the onboard tool
kit, refer to page
237 , into the opening,
arrow 1 .
4. Pull the screwdriver toward the rear until it is
heard to engage, arrow
2 , and leave it
inserted in the opening. The transmission
lock is released.
Releasing on sport automatic
transmission*
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve over the selector lever.
3. Reach into the trim-piece opening, arrow 1 ,
and firmly pull the trim piece upward,
arrow
2 .
4. Remove cover over the opening, refer to 5.