BMW 2 COUPE 2016, Руководство пользователя

Страница: 202 / 234

Accessing the daytime running lights, high
beams/headlight flasher and parking lights
Follow general instructions, refer to page 195 .
1. Open the hood, refer to page 188 .
2. Turn the cover counterclockwise and re‐
move.
Daytime running lights and high beams/
headlight flasher
55-watt bulb, H15.
1. Turn the bulb counterclockwise and re‐
move.
2. Install the new bulb in reverse order of re‐
moval. Turn the clockwise bulb here until it
hits the stop.
3. Close the headlight housing with the lid.
Make sure that the lid engages.
Parking lights
6-watt bulb, H6W.
1. Tilt the bulb holder down and then up to
loosen it from the holder and remove it.
2. Carefully remove the bulb from the bulb
holder.
3. To insert the new bulb, proceed in reverse
order of removal. Make sure you hear the
bulb holder engage.
4. Close the headlight housing with the lid.
Xenon headlights
Hints
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
If a bulb fails, reel on the front fog lights and
continue the trip with great care. Comply with
local regulations.
Do not perform work/bulb replacement
on xenon headlights
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage
present in the system, there is a danger of fatal
injuries if work is carried out improperly.◀
For checking and adjusting headlamp aim,
please contact your BMW center.
Seite 198
Mobility Replacing components
198
Online Edition for Part no. 01 40 2 959 847 - II/15