BMW Motorrad R 1200R 2014 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 231

BMW Motorrad R 1200R 2014 Скачать руководство пользователя страница 45

The word "Service" remains per-
manently visible.

NOTICE

If the service-due indicator ap-
pears more than a month before
the service date, the date saved
in the instrument cluster must
be adjusted. This situation can
occur if the battery was discon-
nected for a prolonged period of
time.
If you want to have the date
set consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.

Fuel reserve

The amount of fuel present in
the fuel tank when the fuel warn-
ing light is switched on is de-
pendent on vehicle dynamics.
The more the fuel moves in-
side the tank (due to regularly
changing angles of heel, fre-

quent braking and acceleration),
the more difficult it becomes to
determine the reserve volume.
For this reason, the fuel reserve
volume cannot be displayed ex-
actly.

After the fuel warning light
has switched on, the range

is displayed automatically.
The distance that can still be
travelled using the reserve
volume depends on the style of
driving (usage) and the amount
of fuel remaining at the time the
light came on (see explanation
above).
The odometer for the fuel re-
serve is reset when the amount
of fuel after refuelling is greater
than the reserve volume.

Oil level

The oil-level indicator

2

gives you

an indication of the engine oil
level. You can call up this read-
ing only when the vehicle is at a
standstill.

The preconditions for the oil level
check are as follows:

Engine at operating tempera-
ture.
Engine idling for at least ten
seconds.
Side stand retracted.

3

43

z

Status indicators

«
...
43
44
45
46
47
...
»

Содержание R 1200R 2014








































































































































































































































Отзывы:

Нет отзывов