BMW Motorrad R 1200 S 2007, Руководство пользователя для мотоциклиста

Страница: 73 / 153

actuate the clutch after switching
on the ignition.
The start attempt is auto-
matically interrupted if bat-
tery voltage is too low. Recharge
the battery before you start the
engine, or use jump leads and a
donor battery to start.
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. (
118)
Pre-ride check
The instrument cluster runs a
test of the 'General' warning light
when the ignition is switched on:
this is the "Pre-Ride-Check" The
'General' warning light shows first
red and then yellow, so that you
can check that it is in working
order. The test is aborted if you
start the engine before it com-
pletes.
Phase 1
General warning light shows
red.
CHECK!
appears on the dis-
play.
Phase 2
General warning light shows
yellow.
CHECK!
appears on the dis-
play.
If the 'General' warning light does
not show:
Some malfunctions cannot
be indicated if the 'Gener-
al' warning light cannot be dis-
played.
Check that the 'General' warning
light comes on, and that it shows
red and yellow.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis OE
The readiness for operation
of the BMW Motorrad ABS is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must
drive faster than 3 mph (5 km/h).
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning
light.
5
71
z Riding
ProCarManuals.com