BMW Motorrad R 1200 RT 2007, Руководство пользователя для мотоциклиста

Страница: 127 / 175

The bulb is pressurised and
can cause injury if dam-
aged.
Wear protective goggles and
gloves when changing bulbs.
The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Replacing high-beam
headlight bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the
left to facilitate access.
Turn cover 1 counter-clock-
wise and remove it.
Remove the high-beam/low-
beam headlight bulb (
127)
Install the high-beam/low-beam
headlight bulb (
127)
Install cover 1 .
Check that the bulb is cor-
rected seated (by looking in
through the headlight lens).
Replacing left low-beam
headlight bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
8
125
z Maint
e
nance
ProCarManuals.com