BMW Motorrad K 1600GT 2018, Руководство пользователя для мотоциклиста

Страница: 84 / 236

swaying movement of the
moving train could trip the
alarm), press button
1 on the
remote control or the radio-
operated key again during the
activation phase.
Turn indicators flash three
times.
Confirmation tone sounds three
times (if programmed).
Motion sensor is deactivated.
Alarm signal
A DWA alarm can be triggered
by:
motion sensor
an attempt to use an unauthor-
ised vehicle key to switch on
the ignition
disconnection of the DWA anti-
theft alarm from the motor-
cycle's battery (DWA internal
battery in the anti-theft alarm
provides power - alarm tone
only, the turn indicators do not
flash).
All functions are sustained even
if the internal battery of the DWA
anti-theft alarm system is flat; the
only difference is that an alarm
cannot be triggered if the system
is disconnected from the motor-
cycle's battery.
An alarm lasts for approximately
26 seconds. While an alarm is in
progress an alarm tone sounds
and the turn indicators flash. You
can adjust the alarm tone type in
the multifunction display.
An activated alarm can be can-
celled at any time by pressing
button
2 of the remote control or
radio-operated key without deac-
tivating the DWA.
If an alarm was activated while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The DWA LED then indicates
the reason for the alarm for one
minute.
4
82
z Operation