BMW Motorrad G 310 GS Скачать руководство пользователя

Страница: 42 / 170

OPERATION

ignition on for longer than ab-

solutely necessary.
The low-beam headlight

switches on automatically

under the following conditions:

When the engine is started.

If the vehicle is pushed while

the ignition is on.

When the engine is not

running you can switch on

the lights by switching on the

ignition and either switching

on the high-beam headlight or

operating the headlight flasher.

with daytime riding light

In daytime the daytime riding

light can be switched on as an

alternative to the low-beam

headlight.

High-beam headlight,

operating

Push switch

forward.

The high beam is switched

on.

High beam indicator light

lights up.

Move switch

to the centre

position.

The blue high beam indicator

light goes out.

The low-beam headlight is

switched on.

Using daytime riding light

with daytime riding light

WARNING

Switching on the daytime

riding light in the dark.

Risk of accident

Do not use the daytime rid-

ing light in the dark.

By comparison with the

low-beam headlight, the

daytime running light makes

the vehicle more visible to on-

coming traffic. This improves

daytime visibility.

Push switch

back.

Содержание G 310 GS











































































































































































Результаты поиска

Содержание G 310 GS

Отзывы:

Похожие инструкции для G 310 GS

Бренды по названию

Популярные бренды

BMW Motorrad G 310 GS, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание G 310 GS

Отзывы:

Похожие инструкции для G 310 GS

Бренды по названию

Популярные бренды