BMV BestScan S10, Руководство пользователя

Страница: 33 / 46

31
B mode Conventional measurement items
Measurement items function
distance Measure the distance between two points on the ultrasound image.
angle
Measure the angle between two intersecting planes on an ultrasound
image.
Square meter
Measure the area and perimeter of a closed area on the ultrasound
image.
Three distance
volume
Measure the volume of the target object.
The length of the eeg Measure the length of a curve on an ultrasound image.
Square meter of the
eeg Measure the area and perimeter of a closed curve area on the
ultrasound image.
Length Ratio
Measure the length of the two segments on the ultrasound image and
calculate the ratio.
Square meter ratio
Measure the area of two enclosed areas on the ultrasound image and
calculate the ratio.
histogram
Measure the gray distribution of the ultrasonic echo signal in a closed
area on a statistical ultrasound image.
M Conventional measurement items
Measurement items Function
distance
Measure the distance between any two points on a vertical line at a
time.
time Measure the time interval between two points on the M image.
slope
The average slope between the two points is calculated by measuring
the distance and time of the two points.
heart rate
On the M heart image, the time interval between the two cardiac cycles
was measured and the heart rate was calculated.
Attention: 1. During the measurement shutdown, all unsaved data will be lost
2. During the measurement process, once the frozen state is released, all measurement
information on the image is deleted.
3. The change in mode clears the normal / applied measurement data on the screen.
4
Prohibit meaningless measurements.
5 Measurements are required in the ultrasound image area, and measurements in the
non‐image area are prohibited to avoid misdiagnosis.
6 Measurements should be accurate, if the positioning is not accurate, please remove
the measurement data to re‐measure, to avoid the incorrect results caused by
misdiagnosis.