BMS Romans, Руководство по сборке

Страница: 5 / 10

Remove the bolt holding the front forks
to the frame. Do not discard the bolt and
nut.
Remove the spacer from between the
front brake pads
Insert the bearing sleeve into the wheel
on the side with the brake rotor.
Place the spacer between the brake rotor
assembly hole and the fork. Place the
bearing assembly (hanging) on the side
of the wheel without the brake rotor.
Slide the front wheel into the front forks
Align the brake rotor with the space in
the brake caliper between the brake
pads