BMS CT6020HD, Справочное руководство

Страница: 19 / 39

Chapter 4: Operating the Equipment
Reference Guide: CT6020HD Page 19
March 09
To edit the modulation sub-menu press Enter-Button for 2 seconds.
Use the Up- and Down-Buttons for navigation and select the desired modulation by
pressing the Enter-Button.
To exit this submenu press Enter-Button.
3.5 Latency (5)
In the sub-menu “Latency” the latency can be chosen. There are two settings,
“Ultra low” and “Standard”.
If low latency is your requirement, then please use the “Ultra-low” setting
If you require a higher picture quality then use the option “Standard”.
To edit the latency sub-menu press Enter-Button for 2 seconds.
Use the Up- and Down-Buttons for navigation and select the desired latency by
pressing the Enter-Button.
To exit this submenu press Enter-Button.
3.6 Audio Input (6)
In the sub menu “Audio Input” the required Audio input can be chosen.
•
LINE
•
MIC
•
EMBEDDED
Please set the transmitter Audio input to match the selected Audio input source. For
example, if you use a microphone then please chose the option “MIC”. Having chosen
“MIC” then you must check further settings under sub-menu points 8 (Mic Gain) & 9
(MIC Phantom)
Correspondingly the choice of “LINE” Option for an external Audio signal would require
checking and adjusting the settings for point 7 (Line Gain).