Optional accessories
Item code
Product description
747038
Compound microscope adapter eyepiece outer Ø 28 mm
747039
Stereo microscope adapter eyepiece outer Ø 34 mm
76395
Aluminum case
760465
Eyepiece WF10x without pointer
747035
BMS EcoCam 5 power adapter Euro 100-240V/5V 2A
747036
BMS EcoCam 5 power adapter UK 100-240V/5V 2A
BMS EcoCam 8 power adapter Euro 100-240V/5V 3A
BMS EcoCam 8 power adapter UK 100-240V/5V 3A
Once you have checked all items included, place the camera on a steady surface. By
moving the goose neck you can get the desired angle and focal point to your
specimen.
When connecting to a microscope, always attach the required optional accessory
adapter (28 mm or 34 mm) before connecting to the microscope.
Now connect the power supply adapter (5V) to the BMS EcoCam camera. You can
immediately use the BMS EcoCam with any of the supplied cables.
When using with a computer, firstly install the supplied software. The software can
be found on the supplied USB stick. For instructions, see further in this manual.
Inputs and outputs:
1. HDMI
:
HDMI signal output. (Used for linkage with HDMI display equipment)
HDMI is the primary signal output when starting the camera the first time.
2. VGA OUT
: VGA (RGB) signal output (15 pin D-SUB). (Used for linkage with
VGA display equipment)
Note:
The HDMI output and VGA output are not simultaneous, there can only be one
output activated at same time. BMS EcoCam automatically activates the last used
output. If there is no image when the camera is turned on, showing on the connected
display (it takes 1min to start), the connected output is not properly activated. Please
use a smartphone or a tablet and the WiFi signal of the BMS EcoCam to choose the
appropriate output.
3. LAN
: Network connection (used to connect with your network)
4. USB-B
: USB connection (used to connect with your PC)
5. USB
: USB connection for the receiver of the supplied cordless USB mouse. To
control the BMS Ecocam camera or for the USB memory stick to
save the
images/videos.
3
