BMPRO ProSmart, Руководство пользователя

Страница: 45 / 52

45
4. Connect the analogue dipper to your water tank as per the analogue dipper’s
requirements.
I have paired a sensor but it is not appearing in the home screen?
There can be multiple reasons why newly-paired sensors are not appearing on
the home screen:
If the ProSmart App is not active when the sensor is paired, once opened it needs
to query all 40 possible sensor locations for active devices, as sensor values may
have changed while the ProSmart App was not active.
On average, this can take six to eight seconds on most phones. Any newly-paired
sensors will appear once this process is complete.
If you have paired multiple phones to your SmartLink, a newly-paired sensor
may not always immediately appear on the home screen of phones that weren’t
used to pair the sensor.
To fix this, refresh the app. This can be done by:
9
Restarting the ProSmart app
9
Pressing the Settings button , then the close button.
Can I connect an analogue water dipper to the SmartLink?
Yes, the SmartLink is designed to support an analogue dipper.
To connect an analogue dipper to your SmartLink:
1.
At the top of the SmartLink, in the red dip switch, move pin 2 to the o
ff
position.
2.
On the bung wiring loom is a single red wire. Connect the analogue dipper’s
red wire to pin 1 of the SmartLink’s water tank sensor connection.
3. Connect the white earth wire at the bottom of the tank to pin 5 of the
SmartLink’s water tank sensor connection.
More information https://www.caravansplus.com.au