ABOUT THE BATTERYCHECK
The BMPRO BatteryCheck is a 12V battery monitor that allows you to check
the status of your secondary battery via your smartphone with the BMPRO
BatteryCPRO app.
The BatteryCheck monitors a range of battery parameters via the app using
built-in Bluetooth technology. Parameters monitored include:
9
Battery voltage.
9
Battery charge/discharge current.
9
Estimated discharge time remaining.
9
Battery temperature.
9
Estimated State of Charge.
The BatteryCheck is designed for use with recreational vehicle secondary
batteries or similar deep cycle battery applications.
There are two available models in the BatteryCheck series: the
BatteryCheck 100 and the BatteryCheckPRO. The BatteryCheck100 can
be retrofitted to standard lead acid batteries and the BatteryCheckPRO is
compatible with standard lead acid and LiFePO4 batteries.
Both BatteryCheck models can monitor batteries with different capacities
of up to 800Ah. The BatteryCheck100 monitors up to 80A and the
BatteryCheckPRO monitors up to 240A, with continuous charging or a
discharging current.
Engine battery cranking applications of any type are not suitable for the
BatteryCheck, and it is not designed for under vehicle bonnet use.
BatteryCheck Serial Number
Each BatteryCheck is assigned a unique 11-character alphanumeric serial
number. The serial number is located on the back of the device.
Secuity PIN
Each BatteryCheck is assigned a unique 6-digit PIN that cannot be changed.
The PIN is located on the back of the device and is required to connect your
BatteryCheck to the app.
We recommend noting down your unique PIN in a safe place.
BMPRO BatteryCPRO app
The BMPRO BatteryCPRO app is compatible with iOS 10 or greater
and Android 4.4 or greater.
8