background image

28

USING THE ASPOWER AS A POWER SUPPLY (BATTERYLESS OPERATION)

The ASPower will act as a power supply if the following conditions are met:

1. 

A battery is not connected to the ASPower, and

2. 

The ASPower is connected and powered from mains, or

3. 

The ASPower is connected and powered from AUX input.

Power Supply mode allows you to control and power your caravan’s loads 
directly from mains or AUX without the need to connect the caravan battery.
When powered from the mains, the ASPower provides an output voltage of 12.8V 
and 35A.
When powered from an AUX input, the output voltage will vary depending on the 
AUX input voltage.

FAULT PROTECTION

Overload and Short-Circuit Protection

If an overload or short circuit is detected the affected output will shut down. The 
ASPower will automatically attempt to restart the output every 30 seconds until 
the fault is removed.

Overvoltage and High Internal Temperature Protection

If an overvoltage or high internal temperatures are detected the ASPower 
will automatically turn off. Once the overvoltage is rectified, or the internal 
temperature drops to normal levels, the ASPower may be restarted by cycling 
the mains input on and off.

Reverse Battery Protection

The ASPower battery fuse fitted by your dealership at the battery protects from 
accidentally connecting the battery to the ASPower in reverse polarity.

Содержание ASPero









































Отзывы: