-27-
function is activated, the network will alert you and the mobile phone screen will display the incoming
call number if others are calling you while you are already in a conversation.
Call diverts:
this network function enables you to forward incoming calls to another number you have
previously specified.
Call barring:
The call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Auto redial
:
Set it to
On
or
Off
to enable or disable auto redial. If you set
Auto redial
to
On
, the mobile
phone will automatically redial the number a moment later if the called party does not reply. The number
of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other
numbers. To end the auto redial process, press the
End
key.
Note
: This function requires support from the network operator to which the SIM card is registered.
IP dial
: Activate/deactivate the IP dial function and add/edit IP numbers.
Call time reminder
: To set single or circle tone in a call to make you know the time.
Answer mode
: Set answer mode as per your need.
