14
Double Wall Adjustable Starter Section
Initial installation
Removal of stove for servicing
Remove loose strip of insulation and
keep to one side.
Slide adjustable case up inside the
outer wall of the chimney.
4.
1.
1.
2.
2.
3.
3.
Insulate liner using strip of insulation
with joint to rear. Width of insulation
can be trimmed to suit.
Insert male spigot of liner into the
appliance spigot.
Remove two loose insulation strips
and keep to one side.
Slide adjustable case down over the
insulation to cover the appliance spigot.
Finished installation.
Seal using the rope gasket, fire
cement or similar.
Loosen the locking band on the liner
using the quick release clip (retain the
locking band to one side).
Break the fire cement seal between
the appliance spigot and chimney liner.
4.
5.
6.
Slide the liner spigot up inside the
chimney until clear of appliance spigot.
Remove the appliance.
5.
6.
