USB-OI16
Seite 8
5
Important Notes for Using the USB-OI16
•
The USB-OI16 is only suitable for extra-low voltages
–
please observe the relevant regulations!
•
An electrically isolated power unit (with CE) must be used for power supply.
•
All accessible pins are electrostatic sensitive devices. Provide for an earthed conductive work place when
installing.
•
Only use non-solvent detergents for cleaning. The product is designed to be maintenance-free.
•
The board must not be used for safety-relevant tasks. With the use of the product, the customer becomes
manufacturer by law and is therefore fully responsible for the proper installation and use of the product. In the
case of improper use and/or unauthorized interference, our warranty ceases and any warranty claim is
excluded.
Do not dispose of the product in the domestic waste or at any waste collection places. It has to be either duly
disposed according to the WEEE directive or can be returned to bmcm at your own expense.
6
Technical Data
(typical at 20°C, after 5min., +5V supply)
•
Digital Inputs
Number:
16 digital inputs, galvanically isolated by 16 optocouplers
Counters:
2 counters/incremental encoders (32 bit, opt. counter reset) can be connected at the first digital inputs
Counter frequency:
max. 250kHz
Input voltage:
3..32V DC (>2.5V = high)
Surge protection:
max. 60V DC for 10sec.
Input current // Input resistance:
max. 0.35mA // app. 100k
•
Digital Outputs
Number:
16 digital outputs, galvanically isolated by 16 optocouplers with 2 high-side drivers
Switching voltage:
5V DC (internal supply) or 7..32V DC (external supply)
Voltage drop (with ext. supply):
app. 1.5V at the high-side driver
Switching current (with ext. supply):
max. 0.25A per output, max. 0.8A in total per 8-bit high-side driver at 25°C
•
General
Power supply:
internal: 5V DC; external: 7..32V DC at 37-pin D-Sub female
Digital connection:
37-pin D-Sub female
USB interface:
attach to PC at USB connector (type B), USB 2.0
CE standards:
EN61000-6-1, EN61000-6-3, EN61010-1; for decl. of conformity (PDF) visit
ElektroG // ear registration:
RoHS and WEEE compliant // WEEE Reg.-No. DE75472248
Max. perm. potentials (galv. isolation):
60V DC acc. to VDE, max. 1kV ESD on open lines
Temperature ranges:
operating temp. -25..60 C, storage temp. -25..70 C
Relative humidity:
0..90% (not condensing)
Dimensions (L x W x H):
app. 97mm x 105mm x 30mm
Delivery:
device with DIN rail carrier and bracket, USB cable
Available accessories (optional):
connecting cables ZUKA37SB, ZUKA37SS, D-Sub plug ZU37ST,
gender changer ZU37SS, waterproof housings ZU-PBOX-PG
Warranty:
2 years from date of purchase at bmcm, claims for damages resulting from improper use excluded
•
Software
Software free of charge download:
LIBAD4 SDK for C/C++ programming on Windows
®
XP/7/8/10, Mac OS X, Unix (FreeBSD, Linux); trial version
of the measuring software NextView
®
to test and operate the hardware
NextView
®
(optional):
professional software (versions: Professional, Lite) for the acquisition and analysis of measurement data on
Windows
®
8/10
Manufacturer: BMC Messsysteme GmbH. Subject to change due to technical improvements. Errors and printing errors excepted. Rev. 2.3
02/11/2020
