bmcm LAN-AD16f, Руководство пользователя

Страница: 3 / 10

LAN-AD16f
2.3 Analog channels
The 37-pin D-Sub female connector at the back of the device is
designed for the connection of the analog inputs and outputs. Input
range (
±
10V,
±
5V,
±
2V,
±
1V) and output range (
±
10V) are set via
software (e.g. in NextView
®
4 ).
The pin assignment of the 37-pin D-Sub female is as follows:
D-Sub 37 LAN-AD16f D-Sub 37 LAN-AD16f
1 AIn 1 11 AIn 11
2 AIn 2 12 AIn 12
3 AIn 3 13 AIn 13
4 AIn 4 14 AIn 14
5 AIn 5 15 AIn 15
6 AIn 6 16 AIn 16
7 AIn 7 17 n. c.
8 AIn 8 18 AOut 1
9 AIn 9 19 AOut 2
10 AIn 10 20..37 AGND
The max. potentials to ground must not exceed
±
12V. Any channel overload may influence measure-
ments of other channels and may lead to wrong values.
The internal connection of the 16 analog inputs is provided via
a 40-way pin connector (see figure on the right) on the
LAN-AD16f board, which, for example, can be used to con-
nect current shunts (
ZU-CS250R available as accessory).
The pin assignment of the 40-way pin connector is listed in the
following table:
Pin LAN-AD16f Pin LAN-AD16f
1 AIn 1 17 AIn 9
3 AIn 2 19 AIn 10
5 AIn 3 21 AIn 11
7 AIn 4 23 AIn 12
9 AIn 5 25 AIn 13
11 AIn 6 27 AIn 14
13 AIn 7 29 AIn 15
15 AIn 8 31 AIn 16
2, 4, .., 30, 32 AGND 33, 34, .., 39, 40 n. c.
Page 3