BMB DAR-800II, Руководство пользователя

Страница: 19 / 22

19
Trouble Possible cause Remedy
No video. VIDEO OUT jacks are not fully con-
‚
nected.
Firmly insert TV monitor plug into
‚
VIDEO OUT jack.
VIDEO IN jacks (KARAOKE, DVD,
‚
CAMERA) are not fully connected.
Firmly insert plugs into VIDEO IN jacks.
‚
Function is switched to AUX, TAPE
or BGM while playing KARAOKE
or DVD.
Input sensitivity of KARAOKE or DVD
‚
is low.
Set SENSITIVITY switch on the rear
‚
panel to H.
No audio is played back even if
KARAOKE or DVD audio signal is
input.
AUTO SELECT switches are set to
‚
VIDEO.
Set AUTO SELECT switches to AUDIO
‚
or A & V.
Playback picture does not appear
even if KARAOKE or DVD signal is
input.
AUTO SELECT switches are set to
‚
AUDIO.
Set AUTO SELECT switches to VIDEO
‚
or A & V.
No sound : Amplifier stops as error “ERROR 01” is indicated on LCD
‚
Power amplifier of SYSTEM-1 is error.
‚
Please see information as bellow.
No sound : Amplifier stops as error “ERROR 02” is indicated on LCD
‚
Power amplifier of SYSTEM-2 is error.
‚
Please see information as bellow.
No sound : Amplifier stops as error “ERROR 12” is indicated on LCD
‚
Power amplifier of SYSTEM-1 and -2
‚
is error. Please see information as bel-
low.
TROUBLESHOOTING
If an "ERROR" indication appears and no audio is output
while using the unit, switch the power OFF, then check the
following:
1
Is the impedance of the connected speakers proper?
See page 12 for more details.
2
Isn't the amp temperature too high while using it?
If it is, leave the unit for approx. 20 minutes, then use it
with the volume lowered.
Check the left, then switch the power ON.
At this time, see that the "ERROR" indication does not
appear. If it still does, the unit is faulty; contact the dealer
from whom you purchased it.
DAR-800II.indd 19 09.11.5 10:13:34 AM