BMB DAH-100, Руководство пользователя

Страница: 11 / 20

11
CONNECTIONS
■
How to connect the RCA pin plugs
When connecting the RCA pin plug cables, match
the colours. Connect the red cable to the red
terminal and the white cable to the white terminal.
■
How to connect speakers
1
Strip the speaker cable.
2
Press and hold the red (and black) lever of
SPEAKER OUTPUT to open the terminal,
then insert the stripped end of the cable
while holding down the lever.
3
Release the red (and black) lever to close the
terminal to fix the cable.
To connect CSH-200/CSH-W200 (not supplied),
see P.12.
Notes:
• Make sure that the frayed wire (straggly
conductors) do not stick out of the terminals. If
the frayed wires come into contact with other
conductors, it may lead to failure of the unit.
• Use speakers with a nominal impedance of 4
Ω
to 8
Ω
.
• If speakers with an impedance lower than 4
Ω
are connected, the protective circuit may go into
operation, hindering normal stereo playback.
Red
Red
White
White
Right
Left
Strip about 15 mm of the outer
covering from the ends of the
cables by using pliers before
making connections.
Red lever
Terminal
Stripped end
of the cable
Black lever
SPEAKER
OUTPUT
Match +
wire with +
connector.
Match -
wire with -
connector.