Getting
started...
3
INTRODUCTION
The wireless alarm system is designed to protect your home. It is a simple to use, easy to
install unit. No special tools or training are required, all fixings are included.
Control panel, adaptor, movement detector and Door/Window contact are for indoor use only.
Avoid mounting location which can expose these product to splashing or dripping liquid.
SAFETY
Before proceeding with the installation, please note the following safety warnings:
DO NOT connect the mains supply directly to the products, this will cause
permanent damage to the products.
Always follow the manufacturer’s advice when using any tools power tools, ladder/steps,
using steps or ladders, and wear suitable protective equipment (e.g. safety goggles) when
drilling holes, etc.
The use of ear defenders are advisable when working in close proximity to the External
Siren or the Control Panel’s Siren when the front panel cover is removed due to the high
sound level produced by it.
Before drilling holes in walls, check for hidden electricity cables and water pipes. The use
of a cable/pipe locator is advisable if in doubt.
Batteries (battery pack or batteries installed) should not be exposed to excessive heat.
Danger of damage to the unit may occur if battery is incorrectly replaced.
Replace only with the same or equivalent type (Do not mix batteries type).
IE
Getting
started...
Introduction & Safety
BLY1
Wireless Alarm System
IMPORTANT:
Please read this manual carefully, in full, before commencing
installation. You will find installation easier if you follow these steps in the sequence
shown.
Wireless Alarm System.indd 4
01/06/2012 10:57