background image

 

2

1.

 Preparation

   

Preparation before using the bluetooth headset (“headset” for short):

  

Charging up the headset; 

Matching up the headset and cell phone with enabled bluetooth function. 

 
 

2. Electric Charging

   

Bluetooth wireless headset equips with built-in a rechargeable battery; we advise you 
to fully charge the battery before initially using the headset.     

Plug the charger in AC socket, and then connect the charger to the charging jack 

of headset. 

The first charging time is around one hour; during charging, the indicator lights 

up; while finishing, the indicator goes out. 
 

Note:

 The indicator won’t light up until a few seconds later if the headset hasn’t been 

used for a quite long time or the battery’s electric quantity has been used up. 

 

3. Matching Up (Headset and Cell Phone) 

Matching up the headset and the cell phone (with bluetooth function) is required 
before using the headset for the first time.   
Procedures of matching up the headset and the cell phone with bluetooth function are 
given below. As a rule, different type of cell phone should adopt different matching 
procedures.  

Matching up the headset and the cell phone: 

1

Put the headset and the cell phone in an observable place and keep them about one 
meter away from each other.   

2

Make sure the headset in “Off” status.   

3

Press down the “TALK” button for 7 seconds and above, till the indicator of 
headset flashes with blue light.   

4

According to the User’s Manual of the cell phone, activate its bluetooth function.   

5

Set bluetooth device’s name list, for which the cell phone searches within one 
meter, and choose “BLwave VE811”.   

6

Type in default password “0000”, press “OK”, and then match up the headset and 
the cell phone, later the indicator of headset will flash quickly for quite a few 
times and finally remain the twinkle frequency of 3 seconds/time.   

7

Press “RETURN” to Home Directory of the cell phone; an headset icon may 
appear on display screen of some types of cell phones. Now the headset is ready 
for dialing and answering calls. 

 
Note: Matching up should be finished within 5 minutes after you choosing the 

Содержание VE811









Отзывы: