635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax 407-426-7721
Page 7 of 8
RF Wireless Touching LED Remote Controller
(Color Adjusting)
1.
Technical Parameters (remote control):
•
Power supply: AAA battery*3pcs
•
Working voltage: DC 12V/24V
•
Cover material: ABS
•
Fabrication processing: multicolor printing & UV varnish
•
Output control: 3circuits (R/G/B)
•
Control current: 6A/circuit
•
Connecting method: common anode
•
Dimension: L85*W64*H24
•
Receiving range: 20meters
2.
Functions of Keys
•
Key 1: on/off
•
Key 2: light changing mode (15 modes)
•
Key 3: color light/white light switching mode
•
Key 4: turn up (brightness/speed)
•
Key 5: turn down (brightness/speed)
3.
How to use
•
Press Key 1 to turn on/off in any state.
•
Press Key 2 to activate light changing mode. A new mode each press, 15 modes in total.
•
Press Key 3 once to activate while light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to
activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color
ring.
•
Resume function. The previous setting will be resumed while power on again.
•
Matching code: Press Key 4 once within 3 seconds when power on again, the light will blink 3 times if matching is
successful.
•
Cleaning code: Press Key 4 five times within 3 seconds when power on again, the light will blink 6 times if clearing is
successful.
1
Auto color changing
8 grades of brightness to adjust by pressing Key 4 or Key 5
2
Three colors jumps to change
8 grades of speed to adjust by pressing Key 4 or Key 5
3
Seven colors jumps to change
4
Three colors jumps to gradual change
5
Seven colors jumps to gradual change
6
Red color jumps to change
8 grades of brightness to adjust by pressing Key 4 or Key 5
7
Blue color jumps to change
8
Purple color jumps to change
9
Green color jumps to change
8 grades of brightness to adjust by pressing Key 4 or Key 5
10
Yellow color jumps to change
11
Cyan color jumps to change
12
White color jumps to change
13
Red/Blue light twinkles alternately
8 grades of brightness to adjust by pressing Key 4 or Key 5
14
Green/Blue light twinkles alternately
15
Red/Green light twinkles alternately
4.
Caution: Please don’t touch or press the color ring while loading the
batteries to protect the sensitiveness. Please use the remote controller 3
seconds after the batteries are loaded. Please reload the batteries when
you find the color ring is not sensitive.
5.
Connecting chart: