bluwash BWD2000, Инструкция по эксплуатации

Страница: 6 / 15

■
After sticking the installation guide placed in the product
box on the wall, make the holes with the depth of 30mm
in 4 upper sides and 2 lower sides by using a concrete
drill with the diameter of 6mm as shown in the drawing.
Insert nylon anchors into the holes.
In case of installation on the other walls than a concrete
6. Installation Method
Make sure to put the power cable tightly into the socket with AC230V, 50Hz/60Hz
and do not put it into the shaking or worn-out soc ket. If the power cable is not
This indication means that the person may be possibly injured or
property damage may occurs if he or she uses the machine
improperly, ignoring this indication.
don't so, you may be injured or the machine may be damaged due to the separation
of the machine.
The rated power consumption of the machine with AC 230V and 50/60Hz is 1200W.
Make sure to install the appropriate wiring according to the above.
Use a single-phase alternating current 230V.
(If you use 110V, the machine cannot be operated.)
1. Fixation of Installation Plate (Consideration for
installation environment)
Install the wiring correctly following the regulation for electrical installation
and the domestic wiring regulation.
(In case of interior wiring, use exclusive wires.)
Do not install the machine in the following places.
(Installing so causes troubles
on the machine.)
- Places where temperature is more than 40, condensation breaks out, and water is directly contacted
Hand Drill for
Concrete
- Places where direct sunlight or strong light exists and there is corrosive, neutral, or reducing gas
The effective length of the power cable is about 1.8m. Install the socket in a space
within about 1m from the place where you try to install the machine and without
water splash.
Do not let the machine exposed to direct sunlight. Direct exposure to sunlight
causes discoloration or malfunction.
Cautions before Installation
Caution
BWD2000