background image

RX70AMP

 User ManUal

03

contact

 [email protected] / [email protected]

•  Multifunction HDBaseT receiver 

and Class D Amplifier in one 
compact box.

•  3:1 Audio Switcher/Receiver – Audio 

from centralized source via HDBaseT 
transmitter, Audio Return Channel 
(ARC) or local L/R source.

•  70m/230ft transmission distance 

between device and RX70AMP

•  2.1 stereo audio at 30w per channel 

- amplifier capable of driving 4, 6 & 8 
Ohm speaker loads.

•  High quality pre-amplifier adjust-

ment for tone/volume/sub/mute 
control.

•  Variable Analog line level outputs.
•  Analog (RCA) Subwoofer output.
•  S/PDIF out.
•  Stereo speaker amplified outputs 

with left/right spring terminal con-
nections.

•  Bi-directional control of source and 

display via IR or RS232 from HDbaseT 
transmitter end

•  EDID management and pre-sets via 

DIP switch.

•  HDMI v1.4 features supported.
•  HDCP compliant.
•  Internal ESD protection.
•  Compact size for flexible integration 

location.

•  Mounting brackets supplied.

The RX70AMP,

 with HDBaseT chipset inside is a combination of 

HDBaseT (HDBT) receiver and Class D digital audio amplifier. It also 
supports the Audio Return Channel (ARC), multiple control modes, 
bi-directional IR, RS232 and front panel control for useful audio-visual 
integration.

Introduction

Front Panel

FeATuRes:

4

4

4

3

3

3

3

1

  Input indicators – Indicates the cur-

rent selected input source HDMI or 
HDBT.

2

  IR indicator – Flashes when an IR 

signal is received from the remote 
control.

3

  2.0/2.1 Audio LED indicator  – Indi-

cates what audio mode is selected 
2.0/2.1 (Selected by using the 
remote).

4

  Audio Source LED indicator –  

Indicates the currently selected 
audio input.

5

  Audio Source Select button – Press 

to manually toggle through L/R, 
ARC or HDBaseT audio sources 
(Lit when selected). Press it for 5 
seconds (the ‘Audio Source LED In-
dicator’ flashing) to switch between 
local HDMI input and HDBT input.

6

  DIP switch for EDID – enables the 

EDID to be user definable (See table 
below for settings)

7

  IR window – Receives the IR signal 

from the remote control of RX-
70AMP

Отзывы: